IPS InLine is a leucite-containing veneering ceramic for the conventional layering technique.
With IPS InLine, we can achieve the desired shade easily, the desired result quickly and furthermore, IPS InLine restorations are beautiful!
The accurate shade is the basis for restorations with a lifelike appearance. The IPS InLine system is suitable to achieve accurate shade match with the shade guide and esthetic results in no time at all. The materials are available in A-D, Chromascop and four modern BL Bleach shades.
Restorations made of IPS InLine ceramic materials impress users with their overall natural appearance. Moreover, there are various additional materials to achieve special effects.
For example, individual details and special shade characteristics can be easily reproduced using the Opal and Translucent materials.
The four new modern Bleach shades BL1, BL2, BL3 and BL4 round off the IPS InLine System.
The preparation must provide sufficient space to achieve stable and esthetic metal-ceramic restorations. The usual preparation guidelines for metal-ceramics apply for the IPS InLine System.
As usual for metal-supported restorations, dentists may use conventional cementation. A chamfer preparation is suitable for tapered metal margins. For metal-supported inlays, partial crowns and inlay-retained bridges that are seated using conventional cementation, a chamfer preparation is indicated to minimize the cement gap. The margin is designed in metal.
For esthetically pleasing single crowns and bridge abutment crowns, a ceramic shoulder should be provided. For that purpose, a shoulder preparation is required. With adhesive cementation, the margin can be designed in the ceramic. However, the margin should not be bevelled in such cases, since thin, non-metal-supported margins demonstrate a fracture risk.
With conventional cementation, a minimum height of 3 mm of the prepared tooth and a convergence angle of approx. 6° must be observed. The following minimum connector dimensions should be observed for bridge restorations: The connector dimensions depend on the selected alloy and the pontic width.